Hameg HMO compact series

From sigrok
Jump to navigation Jump to search
Hameg HMO compact series
Hameg HMO2024.png
Status supported
Source code hameg-hmo
Channels 2-4 analog, 8 digital
Samplerate 2GSa/s (interleaved), 1GSA/s (non interleaved)
Analog bandwidth 70-200MHz (depending on model)
Vertical resolution 8bits (HiRes up to 10bits)
Triggers pulse width, slope, video, pattern, serial bus (optional)
Input impedance 1MΩ‖14pF 200Vp CAT I, 50Ω 5V RMS (model dependent)
Memory 2Mpts (mode/ch-dependent)
Display 6.5" VGA (640x480), 256 colors
Connectivity USB host/device, RS232, ethernet (optional), GPIB (optional)
Features math: + / — / x / FFT, statistics, vertical sensitivity: 1mV/div - 10V/div
Website hameg.com

The Hameg HMO compact series are 70-200MHz, 2GSa/s, 2-4 analog channel and 8 digital channel digital storage oscilloscopes.

All models support different extension modules which provide different connectivity.

Most models come with a HO720 (RS232, USB) module, other modules like the HO730 (USB, ethernet) and the HO740 (GPIB) are available optionally.

All models come with analog probes (specific probe might depend on the scope's capabilities).

Digital probes are optional extra, see HO3508.

Devices

Model Bandwidth Analog Channels Digital Channels
HMO722 70MHz 2 8
HMO1022 100MHz 2 8
HMO1522 150MHz 2 8
HMO2022 200MHz 2 8
HMO724 70MHz 4 8
HMO1024 100MHz 4 8
HMO1524 150MHz 4 8
HMO2024 200MHz 4 8
HMO2524 250MHz 4 16

Note that it's uncertain whether HMO2524 strictly belongs to the "HMO compact" series, as it has features that are unique to the HMO3000 series, and comes in a different case. Nevertheless, the HMO2524 is supported by libsigrok's hameg-hmo driver.

Protocol

All the devices use same SCPI protocol.

The serial parameters are configurable on the device, the standard settings are: 115200 baud, 8n1, no handshake.

Some models optionally support USBTMC.

Resources