Rigol DS1102E
Jump to navigation
Jump to search
 | |
| Status | supported |
|---|---|
| Source code | rigol-ds |
| Channels | 2 |
| Samplerate | 1GSa/s (1ch), 500MSa/s (2ch) |
| Samplerate (eq. time) | 25GSa/s |
| Analog bandwidth | 100MHz |
| Vertical resolution | 8bits |
| Triggers | edge, pulse width, slope, video, pattern, continuous time, alternate |
| Input impedance | 1MΩ‖15pF 300V RMS CAT I |
| Memory | 1Mpts (mode/ch-dependent) |
| Display | 5.7" QVGA (320x240), 64K colors |
| Connectivity | USB host/device, RS232, pass/fail out |
| Features | math: + / — / x / FFT, vertical sensitivity: 2mV/div - 10V/div |
| Website | rigolna.com |
The Rigol DS1102E is a 100MHz, 1GSa/s, 2-channel digital storage oscilloscope.
See Rigol DS1102E/Info for more details (such as lsusb -v output) about the device.
See Rigol DS1000 series for information common to all devices in this series.
Hardware
TODO.
Photos
Device, front
Device, back
Device, top
Device, left
Device, right
Waveform
Protocol
See Rigol DS1000 series#Protocol.
Resources
- Rigol: DS1102E related documents (datasheet, user guide, ...)
- ajawam1: Rigol DS1102E teardown
- DS1000E Programming Guide (link dead)
- Rigol Homebrew wiki (lots of useful info)