Supported hardware

From sigrok
Jump to navigation Jump to search

sigrok is intended as a flexible, cross-platform, and hardware-independent software suite, i.e., it supports various devices from many different vendors.

Here is a list of currently supported devices (various stages of completeness) and devices we plan to support in the near future.

Logic analyzers

Device Status Comments
Saleae Logic.jpg
Nuvola OK.png
supported
The Saleae Logic is a USB-based, 8-channel logic analyzer with up to 24MHz sampling rate.
Eeelec xla esla100.jpg
Nuvola OK.png
supported
The EE Electronics ESLA100 is a USB-based, 8-channel logic analyzer with up to 24MHz sampling rate.
ASIX SIGMA.jpg
Nuvola OK.png
supported
The ASIX SIGMA/SIGMA2 is a USB-based, 16-channel logic analyzer with up to 200MHz sampling rate, and with 256Mbit on-board memory.
Openbench logic sniffer front.jpg
Nuvola OK.png
supported
The Openbench Logic Sniffer (OLS) is a USB-based (and FPGA-based), 32-channel logic analyzer with up to 100MHz sampling rate and advanced trigger functionality. It is a fully open source device — the circuit design, VHDL code for the FPGA, firmware for the PIC microcontroller and Java-based client software are all freely available. It uses the extended SUMP protocol.
Logic-shrimp-front.png
Nuvola OK.png
supported
The Logic Shrimp is a USB-based, 4-channel logic analyzer with up to 20MHz sampling rate. It uses the extended SUMP protocol.
Zeroplus Logic Cube.jpg
Nuvola OK.png
supported
The ZEROPLUS Logic Cube LAP-C (16032) is a USB-based, 16-channel logic analyzer with up to 100MHz sampling rate.
Chronovu la8 device.jpg
Nuvola OK.png
supported
The ChronoVu LA8 is a USB-based, 8-channel logic analyzer with up to 100MHz sampling rate.
Robomotic buglogic3.jpg
Nuvola OK.png
supported
The Robomotic BugLogic 3 is a USB-based, 8-channel logic analyzer with up to 24MHz sampling rate.
Robomotic minilogic.jpg
Nuvola OK.png
supported
The Robomotic MiniLogic is a USB-based, 8-channel logic analyzer with up to 24MHz sampling rate.
Lcsoft-miniboard-front.png
Nuvola OK.png
supported
The Lcsoft Mini Board is a Cypress FX2 eval board, which can be used as USB-based, 16-channel logic analyzer with up to 24MHz sampling rate.
Braintechnology usb lps.jpg
Nuvola OK.png
supported
The Braintechnology USB-LPS is a USB-based, 16-channel logic analyzer (and signal generator) with up to 24MHz sampling rate.
Cwav usbee sx.jpg
Nuvola OK.png
supported
The CWAV USBee SX is a USB-based, 8-channel logic analyzer (and signal generator) with up to 24MHz sampling rate.
ARMFLY MINI LOGIC PCB.JPG
Nuvola OK.png
supported
The ARMFLY Mini-Logic is a USB-based, 8-channel logic analyzer with up to 24MHz sampling rate.
Braintechnology usb interface v2x pcb front.jpg
Nuvola OK.png
supported
The Braintechnology USB Interface V2.x is a Cypress FX2 eval board, which can be used as USB-based, 16-channel logic analyzer with up to 24MHz sampling rate.
Nuvola Orange.png
in progress
The Buspirate v3 is a USB-based, 5-channel logic analyzer with up to 1MHz sampling rate. It uses the extended SUMP protocol.

The Buspirate supports a logic analyzer mode and can thus be used for sample captures, however only at low speeds.
Ant18e closed.jpg
Nuvola Orange.png
in progress
The RockyLogic Ant18e is a USB-based, 18-channel logic analyzer with up to 1GHz sampling rate.
Rockylogic ant8 device.jpg
Nuvola Orange.png
in progress
The RockyLogic Ant8 is a USB-based, 8-channel logic analyzer with up to 500MHz sampling rate.
Ikalogic scanalogic2 device with probes.jpg
Nuvola Red.png
planned
The Ikalogic SCANALOGIC-2 PRO is a USB-based, 4-channel logic analyzer with up to 20MHz sampling rate.
Microchip pickit2 device front.jpg
Nuvola Red.png
planned
The Microchip PICkit2 is a USB-based, 3-channel logic analyzer with up to 1MHz sampling rate.

The PICkit2 is actually a programmer/debugger for PIC microcontrollers, but it can also be used as logic analyzer.
Minila mockup.jpg
Nuvola Red.png
planned
The MiniLA Mockup is a USB-based, 32-channel logic analyzer with up to 100MHz sampling rate.
Acute pkla1216 front.jpg
Nuvola Red.png
planned
The Acute PKLA-1216 is a USB-based, 16-channel logic analyzer with up to 200MHz sampling rate.
Saleae Logic16 bottom.jpg
Nuvola Red.png
planned
The Saleae Logic16 is a USB-based, 16-channel logic analyzer with 100/50/25/12.5MHz sampling rate (at 2/4/8/16 enabled channels).
Intronix Logicport.jpg
Nuvola Red.png
planned
The Intronix Logicport LA1034 is a USB-based (and FPGA-based), 34-channel logic analyzer with up to 500MHz sampling rate.

Mixed-signal devices

Devices which can be used as both logic analyzer and oscilloscopes.

Device Status Comments
AX-Pro.JPG
Nuvola OK.png
supported
The ARMFLY AX-Pro is a USB-based, 8-channel logic analyzer with up to 24MHz sampling rate, and with 2 additional analog channels.

Note: Only the logic analyzer functionality is supported so far, analog support is work in progress.

Esla201a.JPG
Nuvola OK.png
supported
The EE Electronics ESLA201A is a USB-based, 8-channel logic analyzer with up to 24MHz sampling rate, and with 2 additional analog channels.

Note: Only the logic analyzer functionality is supported so far, analog support is work in progress.

Link Instruments MSO-19 front.jpg
Nuvola Orange.png
in progress
The Link Instruments MSO-19‎ is a USB-based, 1-channel 2GSa/s oscilloscope, 8-channel 200MSa/s logic analyzer, 100MSa/s pattern generator and a TDR.
Nuvola Red.png
planned
The QuantAsylum QA100 is a USB-based, mixed-mode oscilloscope with 12 digital inputs, 2 analog, 1 trigger and 1 audio waveform generator.
Polabs poscope basic2 device top.jpg
Nuvola Red.png
planned
The PoLabs PoScope Basic2 is a USB-based, 16-channel logic analyzer (plus oscilloscope, signal/pattern generator, and more) with up to 8MHz sampling rate.
Nuvola Red.png
planned
The Rigol VS5202D is a USB-based, 2-channel analog oscilloscope (400MSa/S, 200MHz bandwidth) and 16-channel logic analyzer (200MHz sampling rate).
Agilent MSO7104A.jpg
Nuvola Red.png
planned
The Agilent MSO7104A is a standalone, 4-channel mixed-signal digital storage oscilloscope (1GHz bandwidth, 4GSa/s samplerate, 16-channel logic analyzer).

Oscilloscopes

Device Status Comments
Dso2090-case-top-small.jpg
Nuvola OK.png
supported
The Hantek DSO-2090 is a USB-based, 2-channel oscilloscope with an analog bandwidth of 40MHz and 100MS/s sampling rate.
Hantek dso-5200a device front.jpg
Nuvola Orange.png
in progress
The Hantek DSO-5200A is a USB-based, 2-channel oscilloscope with an analog bandwidth of 200MHz and 250MS/s sampling rate.
Velleman pcsu1000 pcb front.jpg
Nuvola Red.png
planned
The Velleman PCSU1000 is a USB-based, 2-channel oscilloscope with an analog bandwidth of 50MHz and 1GS/s sampling rate.
Picoscope 2203 front.jpg
Nuvola Red.png
planned
The Pico Technology PicoScope 2203 is a USB-based, 2-channel oscilloscope with an analog bandwidth of 5MHz and 40/20MS/s sampling rate (1-/2-channel one-shot mode).
PicoScope 2205 front.jpg
Nuvola Red.png
planned
The Pico Technology PicoScope 2205 is a USB-based, 2-channel oscilloscope with an analog bandwidth of 25MHz and 200/100MS/s sampling rate (1-/2-channel one-shot mode).
Picoscope 3206.jpg
Nuvola Red.png
planned
The Pico Technology PicoScope 3206 is a USB-based, 2-channel oscilloscope with an analog bandwidth of 200MHz and 200/100MS/s sampling rate (1-/2-channel one-shot mode).

Multimeters

Device Status Comments
Agilent U1232A.jpg
Nuvola OK.png
supported
The Agilent U123xA series are 6000 counts handheld digital multimeters with IR connectivity.
Fluke 187.jpg
Nuvola OK.png
supported
The Fluke 187/189 are 50000 counts, handheld digital multimeters with RS232 connectivity.
Fluke 287.jpg
Nuvola OK.png
supported
The Fluke 287/289 are 50000 counts handheld digital multimeters with RS232 connectivity.
Nuvola OK.png
supported
The Radioshack 22-812 is a 4000 counts handheld digital multimeter with RS232 connectivity.
Victor 70C.jpg
Nuvola OK.png
supported
The Victor 70C is a 4000 counts, CAT II handheld digital multimeter with USB connectivity.
Nuvola OK.png
supported
The Victor 86C is a 4000 counts, CAT III (1000V) handheld digital multimeter with USB connectivity.
Image coming soon Nuvola Orange.png
in progress
The TekPower TP4000ZC is a 4000 counts handheld digital multimeter with RS232 connectivity.
Uni t ut61d device.jpg
Nuvola Orange.png
in progress
The UNI-T UT61D is a 6000 counts, CAT II (600V) / CAT III (300V) handheld digital multimeter with RS232 or USB connectivity.
Mastech va18b device front.jpg
Nuvola Orange.png
in progress
The V&A VA18B is a 6000 counts, CAT II (1000V) handheld digital multimeter with USB connectivity.
Mastech mas345 device front.jpg
Nuvola Red.png
planned
The MASTECH MAS345 is a 4000 counts, CAT II handheld digital multimeter with RS232 connectivity.
Nuvola Red.png
planned
The MASTECH M9803R is a 4000 counts, CAT II (1000V) digital bench multimeter with RS232 connectivity.
Nuvola Red.png
planned
The Peaktech 4370 is a 2000 counts, CAT II (1000V) handheld digital multimeter with RS232 connectivity.
New ver.JPG
Nuvola Red.png
planned
The UNI-T UT61E is a 22000 counts, CAT II (600V) / CAT III (300V) handheld digital multimeter with RS232 or USB connectivity.
Nuvola Red.png
planned
The Voltcraft M-4660A is a 20000 counts, handheld digital multimeter with RS232 connectivity.
Voltcraft vc820 device.jpg
Nuvola Red.png
planned
The Voltcraft VC-820 is a 4000 counts, CAT III (1000V) / CAT IV (600V) handheld digital multimeter with RS232 or USB connectivity.
Voltcraft vc840 device front.jpg
Nuvola Red.png
planned
The Voltcraft VC-840 is a 4000 counts, CAT IV (600V) handheld digital multimeter with RS232 or USB connectivity.
Nuvola Red.png
planned
The Escort 179 is a 10000 counts, handheld digital multimeter with RS232 connectivity.

Dataloggers

Device Status Comments
Tondaj sl-814 device front.jpg
Nuvola Orange.png
in progress
The Tondaj SL-814 is a sound level meter with USB connectivity.
Rding temper front.jpg
Nuvola Red.png
planned
The RDing TEMPer is a USB-based temperature logger.
Rding temper1 device front.jpg
Nuvola Red.png
planned
The RDing TEMPer1 is a USB-based temperature logger.
Rding temper gold device front.jpg
Nuvola Red.png
planned
The RDing TEMPer Gold is a USB-based temperature logger.
Uni-t ut325 front.jpg
Nuvola Red.png
planned
The UNI-T UT325 is a dual thermocouple logging thermometer.

Function generators

Device Status Comments
Hantek DDS-3X25 top.jpg
Nuvola Red.png
planned
The Hantek DDS-3X25 is a 25MHz PC-based function generator (requires a USB connection to work).
Siglent sdg1010 device front 8116.jpg
Nuvola Red.png
planned
The Siglent SDG1010 is a 10MHz function generator with USB connectivity.

Power supplies

TODO

GPIB interfaces

Device Status Comments
Beiming s82357 device top.jpg
Nuvola Red.png
planned
The Beiming S82357 is a USB-based, hardware-implemented GPIB interface (a clone of the Agilent 82357B USB/GPIB interface).
GPIB-USB 82357B clone front.jpg
Nuvola Red.png
planned
The GPIB-USB 82357B clone is a USB-based, hardware-implemented GPIB interface (a clone of the Agilent 82357B USB/GPIB interface).
Prologix-usb.jpg
Nuvola Red.png
planned
The Prologix GPIB-USB a USB-based, firmware-implemented GPIB interface.
NI GPIB-ENET front.jpg
Nuvola Red.png
planned
The National Instruments GPIB-ENET is an Ethernet-based, hardware-implemented GPIB interface.
ICS 488-USB front.jpg
Nuvola Red.png
planned
The ICS 488-USB is a USB-based GPIB interface.

Potential other candidates

If you own any other logic analyzers (or oscilloscopes, multimeters, dataloggers, etc.) and want to add support for them in sigrok (or donate/lend devices to developers), please let us know. We're always happy to add more hardware support! Contact Bert Vermeulen and Uwe Hermann if you want to help out.