Difference between revisions of "Fx2lafw"
(→TODO) |
|||
Line 221: | Line 221: | ||
== TODO == | == TODO == | ||
* Digital sampling with 16 channels | * <del>Digital sampling with 16 channels</del> | ||
* Analog sampling | * Analog sampling | ||
** 1-channel | ** 1-channel |
Revision as of 07:57, 1 June 2012
fx2lafw is an open-source firmware for Cypress FX2 chips which makes them usable as simple logic analyzer hardware.
It is licensed under the terms of the GNU GPL (version 2, or later) and written in C, using sdcc as compiler, and fx2lib as helper library.
Hardware overview
The fx2lafw firmware is meant to work on any FX2-based hardware, including logic analyzers, FX2 eval boards, or other hardware which has this chip on-board.
Here's a quick overview of some of the relevant hardware information we have about the various devices:
Device | USB VID:PID | Probes (pins) | FX2 package | Buffer/ESD-protection | Resistor per probe | I2C EEPROM | Status |
---|---|---|---|---|---|---|---|
ARMFLY AX-Pro | 08a9:0014 | 8 (PB0-PB7) | 56LTXC (QFN) | ? | ? | Atmel ATML920 24C02N SU27 D | 90%1, 2 |
ARMFLY_Mini-Logic | 08a9:0014 | 8 (PB0-PB7) | 56LTXC (QFN) | ? | ? | Atmel ATML920 24C02N SU27 D | 95%1 |
Braintechnology USB Interface V2.x | 04b4:8613 | 8/16 (PB0-PB7, PD0-PD7) | 56PVXC (SSOP) | none | none | Microchip 24LC64I | 95%1 |
Braintechnology USB-LPS | 16d0:0498 | 8/16 (PB0-PB7, PD0-PD7) | 56PVXC (SSOP) | none | ? 68 Ω | Atmel ATML0816 TINY13 20SU | 95%1 |
CWAV BusBee | ? | 4 | ? | ? | ? Ω | ? | TODO |
CWAV USBee AX | 08a9:0014 | 8 digital (PB0-PB7), 1 analog (PD0-PD7) | ? | ? | ? Ω | ? | 90%1, 2 |
CWAV USBee DX | ? | 16 digital, 2 analog | ? | ? | ? Ω | ? | TODO |
CWAV USBee EX2 | ? | 8 | ? | ? | ? Ω | ? | TODO |
CWAV USBee SX | 08a9:0009 | 8 (PB0-PB7) | 56PVXC (SSOP) | none | 560 Ω | Microchip 24LC01B | 100% |
CWAV USBee ZX | ? | 8 (PB0-PB7) | ? | ? | ? Ω | ? | TODO |
EE Electronics ESLA100 | 0925:3881 | 8 (PB0-PB7) | 56LFXC (QFN) | NXP 74HC245D | 100 Ω | Atmel ATMLH911 02B 1 | 100% |
EE Electronics ESLA201A | 08a9:0014 | 8 digital (PB0-PB7), 1 analog (PD0-PD7) | 56LFXC (QFN) | none | 100 Ω | Atmel ATMLH113 | 90%1, 2 |
Lcsoft Mini Board | 04b4:8613 | 8/16 (PB0-PB7, PD0-PD7) | 56PVXC (SSOP) | none | none | Shenzhen First-Rank Technology T24C128A | 95%1 |
Robomotic BugLogic 3 | 0925:3881 | 8 (PB0-PB7) | ? | ? | ? | ? | 100% |
Robomotic MiniLogic | 0925:3881 | 8 (PB0-PB7) | 56PVXC (SSOP) | 74HC244A | ? | 2x Microchip 24LC02BI, 1x 24LC64I | 100% |
Saleae Logic | 0925:3881 | 8 (PB0-PB7) | 56PVXC (SSOP) | ST DVIULC6-4SC6 | ? Ω | ? | 100% |
All devices use a 24MHz crystal.
1 Sampling with 8 channels works fine, 16 channel sampling is not yet supported.
2 Analog signal support is not yet implemented.
Download
$ git clone git://sigrok.git.sourceforge.net/gitroot/sigrok/fx2lafw
Usage
Build sigrok
- Build and install a sigrok frontend (CLI or GUI) with libsigrok >= 0.1.1 (or latest git HEAD) for your platform as usual, see e.g. Linux, Mac OS X, FreeBSD, or Windows.
Install the udev rules file
These steps prevent the need to run sigrok as superuser.
- Copy the udev rules file from sigrok/libsigrok/contrib/z60_libsigrok.rules to /etc/udev/rules.d/.
- Restart udev: sudo /etc/init.d/udev restart.
Build fx2lafw
$ cd fx2lafw $ git clone git://github.com/mulicheng/fx2lib.git $ make $ sudo cp hw/*/build/*.fw /usr/local/share/sigrok-firmware/
Where /usr/local is your installation prefix.
Test
$ sigrok-cli -D
If everything has worked, sigrok can now see your fx2lafw device, ready for use.
TODO
Digital sampling with 16 channels- Analog sampling
- 1-channel
- 2-channel
- Voltage meter
- Trigger pin
- Clock input
- Clock output
- Frequency/pulse counter
- Signal generator
Resources
- Browse Source Code
- sdcc (C compiler for 8051 microcontrollers, usable for FX2)
- fx2lib: SF project page, blog article, github repo, mailing list
- Cypress FX2 docs:
- CY7C68013A, CY7C68014A, CY7C68015A, CY7C68016A datasheet (PDF)
- EZ-USB Technical Reference Manual (TRM) (PDF)
- EZ-USB FX2LP appnotes
- EZ-USB FX2LP errata
- GPIF Designer (Windows software, requires login)
- CY3681 EZ-USB FX2 Development Kit (GPIF designer downloadable without login)