Difference between revisions of "Rigol DS4000 series"

From sigrok
Jump to navigation Jump to search
(initial commit)
 
m
 
(2 intermediate revisions by the same user not shown)
Line 3: Line 3:
| status              = supported
| status              = supported
| source_code_dir    =  
| source_code_dir    =  
| channels            = 2 or 4 analog, 16 digital (MSO4000 series)
| channels            = analog: 2 or 4, digital (MSO4000 series): 16
| samplerate          = 4GSa/s (interleaved), 2GSa/s (non-interleaved)
| samplerate          = analog: 4GSa/s (interleaved), 2GSa/s (non-interleaved); digital: 1GSa/s
| bandwidth          = 100-500MHz (depending on model)
| bandwidth          = 100-500MHz (depending on model)
| vertical_resolution = 8bits
| vertical_resolution = 8bits
| triggers            = edge, pulse, runt, nth edge, slope, video, pattern, RS232/UART, I²C, SPI, CAN, FlexRay, USB
| triggers            = edge, pulse, runt, nth edge, slope, video, pattern, RS232/UART, I²C, SPI, CAN, FlexRay, USB
| input_impedance    = 1MΩ‖15pF or 50Ω 300V RMS CAT I analog, 101kΩ‖9pF digital
| input_impedance    = 1MΩ‖15pF or 50Ω 300V RMS CAT I analog, 101kΩ‖9pF digital
| memory              = 70/140 Mpts analog (mode/ch-dependent), 28 Mpts (digital)
| memory              = 70/140 Mpts analog (mode/ch-dependent), 28 Mpts/channel (digital)
| display            = 9 Inch WVGA (800x480) 160,000 colours  
| display            = 9 Inch WVGA (800x480) 160,000 colours  
| connectivity        = USB host/device, ethernet (LXI), aux out (trigger, fast, pass/fail, GND), VGA
| connectivity        = USB host/device, ethernet (LXI), aux out (trigger, fast, pass/fail, GND), VGA
Line 17: Line 17:


The [https://www.rigolna.com/products/digital-oscilloscopes/4000/ Rigol DS4000 Series] are 4-channel oscilloscopes with an analog bandwidth of 100-500MHz and 4GSa/s maximum sampling rate.
The [https://www.rigolna.com/products/digital-oscilloscopes/4000/ Rigol DS4000 Series] are 4-channel oscilloscopes with an analog bandwidth of 100-500MHz and 4GSa/s maximum sampling rate.
See [[Rigol DS4000 series/Info]] for more detailed information on the device.


== Protocol ==
== Protocol ==

Latest revision as of 17:20, 29 December 2018

Rigol DS4000/MSO4000 Series
Status supported
Channels analog: 2 or 4, digital (MSO4000 series): 16
Samplerate analog: 4GSa/s (interleaved), 2GSa/s (non-interleaved); digital: 1GSa/s
Analog bandwidth 100-500MHz (depending on model)
Vertical resolution 8bits
Triggers edge, pulse, runt, nth edge, slope, video, pattern, RS232/UART, I²C, SPI, CAN, FlexRay, USB
Input impedance 1MΩ‖15pF or 50Ω 300V RMS CAT I analog, 101kΩ‖9pF digital
Memory 70/140 Mpts analog (mode/ch-dependent), 28 Mpts/channel (digital)
Display 9 Inch WVGA (800x480) 160,000 colours
Connectivity USB host/device, ethernet (LXI), aux out (trigger, fast, pass/fail, GND), VGA
Features math: +, —, x, /, FFT, digital filters, editable advanced operations, logic; vertical sensitivity: 1 mV/div to 5 V/div
Website rigolna.com

The Rigol DS4000 Series are 4-channel oscilloscopes with an analog bandwidth of 100-500MHz and 4GSa/s maximum sampling rate.

See Rigol DS4000 series/Info for more detailed information on the device.

Protocol

The device uses USBTMC or LXI via its Ethernet port for communication with a host PC. The protocol is based on SCPI commands.

Resources