Instrustar ISDS205X

From sigrok
Revision as of 13:31, 19 January 2019 by Martinloren (talk | contribs) (→‎Hardware Cypress FX2 pinout)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
Instrustar ISDS205X
Status planned
Channels 2
Samplerate 48MHz
Analog bandwidth 20MHz
Vertical resolution 8bit
Triggers none (SW-only)
Input impedance 1MΩ‖25pF
Memory none
Display none
Connectivity USB
Website instrustar.com

The Instrustar ISDS205X is a USB-based

  • 2-channel oscilloscope with an analog bandwidth of 20MS/s and 48MS/s sampling rate,
  • 2-channel "data recorder" (same as oscilloscope, simply storing the analog data),
  • 2-channel spectrum analyzer with an analog bandwidth of 20MS/s,
  • 1-channel DDS signal generator (sine, square, triangle, up sawtooth, down sawtooth); sine up to 20MHz, rest up to 2MHz,
  • 8/16-channel logic analyzer with a max. sampling rate of 24MHz.

See Instrustar ISDS205X/Info for more details (such as lsusb -v output) on the device.

Hardware

Cypress FX2 pinout:

PD5 1- O -100
PD6 2- -99
PD7 3- -98
GND 4- -97
CLKOUT 5- -96
VCC 6- -95
GND 7- -94
RDY0/*SLRD 8- -93
RDY1/*SLWR 9- -92
AVCC 10- -91
(24MHz crystal) XTALOUT 11- -90
(24MHz crystal) XTALIN 12- -89
AGND 13- -88
AVCC 14- -87
(USB D+) DPLUS 15- -86
(USB D-) DMINUS 16- -85
AGND 17- -84
VCC 18- -83
GND 19- -82
(CTL0, AD9288 ENCA/B) *IFCLK 20- -81
RESERVED 21- -80
(EEPROM SCL) SCL 22- -79
(EEPROM SDA) SDA 23- -78
VCC 24- -77
PB0 25- -76
PB1 26- -75
PB2 27- -74
PB3 28- -73
PB4 29- -72
PB5 30- -71
PB6 31- -70
PB7 32- -69
GND 33- -68
VCC 34- -67
GND 35- -66
CTL0 (IFCLK, AD9288 ENCA/B) 36- -65
CTL1 37- -64 PC7
CTL2 38- -63 PC6
VCC 39- -62 PC5
PA0 (74HC595D, DS) 40- -61 PC4
PA1 (74HC595D, STCP) 41- -60 PC3
PA2 (74HC595D, SHCP) 42- -59 PC2
PA3 (SHCP, Frequency Generator) 43- -58 PC1
PA4 (DS, Frequency Generator) 44- -57 PC0 (Used as input, unknown)
PA5 (STCP, Frequency Generator) 45- -56 PD4
PA6 (1kHz scope cal pin) 46- -55 PD3
PA7 (activate analog mode vs digital mode) 47- -54 PD2
GND 48- -53 PD1
RESET# 49- -52 PD0
VCC 50- -51 *WAKEUP

NXP 74HC595D pinout:

(upper 74HC4051D, S0) Q1 1-   O -16 VCC
(lower 74HC4051D, S0) Q2 2- -15 Q0 (upper 74HC4051D, S1)
(lower 74HC4051D, S1) Q3 3- -14 DS (FX2 PA0)
Q4 4- -13 OE# (GND)
Q5 5- -12 STCP (FX2 PA1)
Q6 6- -11 SHCP (FX2 PA2)
Q7 7- -10 MR# (VCC)
GND 8- -9 Q7S

NXP 74HC4051D (upper/lower, CH1/CH2) pinout:

Y4 1-   O -16 VCC
Y6 2- -15 Y2
Z 3- -14 Y1
Y7 4- -13 Y0
Y5 5- -12 Y3
(GND) E# 6- -11 S0 (NXP 74HC595D, Q1)
VEE 7- -10 S1 (NXP 74HC595D, Q0)
GND 8- -9 S2 (GND)
Y4 1-   O -16 VCC
Y6 2- -15 Y2
Z 3- -14 Y1
Y7 4- -13 Y0
Y5 5- -12 Y3
(GND) E# 6- -11 S0 (NXP 74HC595D, Q1)
VEE 7- -10 S1 (NXP 74HC595D, Q0)
GND 8- -9 S2 (GND)

Microchip 24LC02B (top / bottom) pinout:

(VCC) A0 1-   O -8 VCC
(GND) A1 2- -7 WP (GND)
(GND) A2 3- -6 SCL (FX2 SCL)
VSS 4- -5 SDA (FX2 SDA or NC)

Photos

Resources