Difference between revisions of "DreamSourceLab DSLogic Basic"
Jump to navigation
Jump to search
Uwe Hermann (talk | contribs) |
Uwe Hermann (talk | contribs) |
||
| Line 4: | Line 4: | ||
| status = supported | | status = supported | ||
| source_code_dir = dreamsourcelab-dslogic | | source_code_dir = dreamsourcelab-dslogic | ||
| channels = | | channels = 1-16 | ||
| samplerate = | | samplerate = 400MHz(4ch), 200MHz(8ch), 100MHz(16ch) | ||
| samplerate_state = | | samplerate_state = 30MHz | ||
| triggers = | | triggers = high, low, rising, falling, edge, multi-stage triggers | ||
| voltages = | | voltages = -0.6V — 6V | ||
| threshold = | | threshold = configurable: 0-5V (0.1V increments) | ||
| memory = | | memory = 32MByte (2MByte/ch) | ||
| compression = yes | | compression = yes | ||
| website = [http://www.dreamsourcelab.com/dslogic.html dreamsourcelab.com] | | website = [http://www.dreamsourcelab.com/dslogic.html dreamsourcelab.com] | ||
Revision as of 18:21, 28 December 2017
| 180px | |
| Status | supported |
|---|---|
| Source code | dreamsourcelab-dslogic |
| Channels | 1-16 |
| Samplerate | 400MHz(4ch), 200MHz(8ch), 100MHz(16ch) |
| Samplerate (state) | 30MHz |
| Triggers | high, low, rising, falling, edge, multi-stage triggers |
| Min/max voltage | -0.6V — 6V |
| Threshold voltage | configurable: 0-5V (0.1V increments) |
| Memory | 32MByte (2MByte/ch) |
| Compression | yes |
| Website | dreamsourcelab.com |
The DreamSourceLab DSLogic Basic is a 16-channel USB-based logic analyzer, with sampling rates up to 400MHz (when using only 4 channels).
See DreamSourceLab DSLogic Basic/Info for more details (such as lsusb -v output) about the device.
Hardware
Photos
Device:
Cables:
Probe cable circuit
Firmware
See DreamSourceLab DSLogic#Firmware.