Difference between revisions of "Agilent 34401A"
Jump to navigation
Jump to search
(Initial page) |
(→Photos: Add missing photos of the Agilent 34401A device, front and back) |
||
| (3 intermediate revisions by 3 users not shown) | |||
| Line 15: | Line 15: | ||
== Photos == | == Photos == | ||
<gallery> | |||
Agilent_34401A_-_front.png | |||
Agilent_34401A_-_back.png | |||
</gallery> | |||
== Example use == | == Example use == | ||
Depending on your type of connection you have to can either use the [[Connection_parameters#RS232_.2F_Virtual_Com_Port | RS232 connection parameter]] or the [[Connection_parameters#Linux-GPIB | GPIB connection parameter]]. Examples: | |||
'''--driver=scpi-dmm:conn=/dev/ttyUSB0''' | |||
or | |||
'''--driver=scpi-dmm:conn=libgpib/hp34401a''' | |||
Check the capabilities of the meter's driver, and current state of settings: | Check the capabilities of the meter's driver, and current state of settings: | ||
$ '''sigrok-cli -d scpi-dmm --show''' | $ '''sigrok-cli -d scpi-dmm:conn=/dev/ttyUSB0 --show''' | ||
Get or set the meter's current function: | Get or set the meter's current function: | ||
$ '''sigrok-cli -d scpi-dmm --get measured_quantity''' | $ '''sigrok-cli -d scpi-dmm:conn=/dev/ttyUSB0 --get measured_quantity''' | ||
$ '''sigrok-cli -d scpi-dmm -c measured_quantity=voltage/dc --set''' | $ '''sigrok-cli -d scpi-dmm:conn=/dev/ttyUSB0 -c measured_quantity=voltage/dc --set''' | ||
Acquire measurement data, in the current mode or in another specified mode: | Acquire measurement data, in the current mode or in another specified mode: | ||
$ '''sigrok-cli -d scpi-dmm --continuous''' | $ '''sigrok-cli -d scpi-dmm:conn=/dev/ttyUSB0 --continuous''' | ||
$ '''sigrok-cli -d scpi-dmm --time 10s''' | $ '''sigrok-cli -d scpi-dmm:conn=/dev/ttyUSB0 --time 10s''' | ||
$ '''sigrok-cli -d scpi-dmm --samples 10 -c measured_quantity=current/dc''' | $ '''sigrok-cli -d scpi-dmm:conn=/dev/ttyUSB0 --samples 10 -c measured_quantity=current/dc''' | ||
== Resources == | == Resources == | ||
* [https://www.keysight.com/de/de/assets/7018-06774/data-sheets/5968-0162.pdf Datasheet] | * [https://www.keysight.com/de/de/assets/7018-06774/data-sheets/5968-0162.pdf Datasheet] | ||
* [https://www.keysight.com/us/en/assets/9018-01063/user-manuals/9018-01063.pdf User's guide] | |||
* [https://www.keysight.com/us/en/assets/9018-02040/user-manuals/9018-02040.pdf User's guide errata] | |||
* [https://www.keysight.com/us/en/assets/9018-05613/service-manuals/9018-05613.pdf Service guide] | |||
[[Category:Device]] | [[Category:Device]] | ||
[[Category:Multimeter]] | [[Category:Multimeter]] | ||
[[Category:Supported]] | [[Category:Supported]] | ||
Latest revision as of 04:33, 11 June 2023
| Status | supported |
|---|---|
| Source code | scpi-dmm |
| IEC 61010-1 | CAT II (300V) |
| Connectivity | GPIB, RS232 |
| Measurements | voltage, current, 2- and 4-wire resistance, diode, continuity, frequency, period |
| Features | autorange, true RMS, data hold, relative |
| Website | keysight.com |
The HP 34401A / Agilent 34401A is a 6.5 digits CAT II (300V) bench multimeter.
Photos
Example use
Depending on your type of connection you have to can either use the RS232 connection parameter or the GPIB connection parameter. Examples:
--driver=scpi-dmm:conn=/dev/ttyUSB0
or
--driver=scpi-dmm:conn=libgpib/hp34401a
Check the capabilities of the meter's driver, and current state of settings:
$ sigrok-cli -d scpi-dmm:conn=/dev/ttyUSB0 --show
Get or set the meter's current function:
$ sigrok-cli -d scpi-dmm:conn=/dev/ttyUSB0 --get measured_quantity $ sigrok-cli -d scpi-dmm:conn=/dev/ttyUSB0 -c measured_quantity=voltage/dc --set
Acquire measurement data, in the current mode or in another specified mode:
$ sigrok-cli -d scpi-dmm:conn=/dev/ttyUSB0 --continuous $ sigrok-cli -d scpi-dmm:conn=/dev/ttyUSB0 --time 10s $ sigrok-cli -d scpi-dmm:conn=/dev/ttyUSB0 --samples 10 -c measured_quantity=current/dc