Difference between revisions of "Pico Technology PicoScope 2204A"
Jump to navigation
Jump to search
(test) |
(start of page) |
||
| Line 1: | Line 1: | ||
[[File:Picoscope 2204A.png|thumb|right|PicoScope 2204A.]] | |||
The [https://www.picotech.com/download/datasheets/picoscope-2000-series-data-sheet.pdf Pico Technology PicoScope 2204A] is a 2-channel USB-based PC oscilloscope (and spectrum analyzer and data logger and logic analyzer). It supports a bandwidth of 10MHz. | |||
'''[[UP TO HERE]]''' | |||
The max. sampling rate (one-shot) is 100 MS/s (one channel mode) or 20 MS/s (two channel mode). The max. sampling rate for repetitive signals is 1 GS/s, the max. sampling rate in continuous streaming mode is 1 MS/s. | |||
See [[Pico Technology PicoScope 2203/Info]] for more details (such as '''lsusb -vvv''' output) about the device. | |||
== Hardware == | |||
* Xilinx Spartan XC3S250E | |||
* Cypress CY7C68013A-56PVXC | |||
* Analog Devices AD9288 | |||
* Analog Devices AD8132 | |||
* Meder Electronics SIL05-1A72-71D | |||
* Maxim MAX889S | |||
* HC4052 | |||
== Photos == | |||
<gallery> | |||
File:Picoscope 2203 front.jpg|<small>Front</small> | |||
File:Picoscope 2203 back.jpg|<small>Back</small> | |||
File:Picoscope 2203 pcb front.jpg|<small>PCB front</small> | |||
File:Picoscope 2203 pcb back.jpg|<small>PCB back</small> | |||
</gallery> | |||
See also [http://www.flickr.com/photos/uwehermann/sets/72157625721726427/ this flickr set] for more PCB photos of the device. | |||
== Protocol == | |||
=== Firmware === | |||
The usual Cypress FX2 firmware upload mechanism is used to upload a special FX2 firmware. | |||
=== Start acquisition === | |||
=== Sample format === | |||
=== End acquisition === | |||
=== Triggers === | |||
=== Voltage ranges === | |||
== Resources == | |||
* [http://www.picotech.com/document/datasheets/PicoScope2200.pdf Datasheet] | |||
* [http://www.picotech.com/picoscope-oscilloscope-software.html Vendor software] | |||
[[Category:Device]] | |||
[[Category:Oscilloscope]] | |||
[[Category:Planned]] | |||
Revision as of 07:47, 4 January 2020
The Pico Technology PicoScope 2204A is a 2-channel USB-based PC oscilloscope (and spectrum analyzer and data logger and logic analyzer). It supports a bandwidth of 10MHz.
The max. sampling rate (one-shot) is 100 MS/s (one channel mode) or 20 MS/s (two channel mode). The max. sampling rate for repetitive signals is 1 GS/s, the max. sampling rate in continuous streaming mode is 1 MS/s.
See Pico Technology PicoScope 2203/Info for more details (such as lsusb -vvv output) about the device.
Hardware
- Xilinx Spartan XC3S250E
- Cypress CY7C68013A-56PVXC
- Analog Devices AD9288
- Analog Devices AD8132
- Meder Electronics SIL05-1A72-71D
- Maxim MAX889S
- HC4052
Photos
Front
Back
PCB front
PCB back
See also this flickr set for more PCB photos of the device.
Protocol
Firmware
The usual Cypress FX2 firmware upload mechanism is used to upload a special FX2 firmware.