Search results
Jump to navigation
Jump to search
- ...ased DAQ with 8 analog inputs (12 bits, max. 10kS/s), 2 analog outputs (12 bits, 150Hz update rate), and 12 digital I/Os.868 bytes (119 words) - 18:46, 8 June 2013
- ! STATUS bits ! OPTION1 bits2 KB (236 words) - 02:04, 17 January 2014
- * bits 0-9 are the value, with encoding as shown below * bits 13 is always 1, bits 14-15 are always 04 KB (627 words) - 02:00, 7 March 2017
- * '''RAM''': SB61L256, 768x8-Bits STATIC CMOS RAM646 bytes (94 words) - 02:49, 24 July 2014
- ...''38400 baud''', with '''8n2''' settings (8 data bits, no parity, two stop bits).2 KB (257 words) - 07:51, 10 March 2013
- | Number of data bits | Number of stop bits.4 KB (562 words) - 18:13, 2 November 2014
- ...re the decimal point is '''not''' displayed (bit 7 is not set). All other bits except for bit 6 (segment A, see above) are set, i.e. the respective LCD se Bytes 7 to 10: Next four bits are the big LCD numbers, from right to left, in the format already specifie5 KB (654 words) - 23:03, 15 October 2015
- | vertical_resolution = 8 bits (HiRes up to 16 bits)3 KB (336 words) - 14:07, 9 January 2020
- Data is sent on the serial port at 9600 baud with 8 data bits, no parity, 1 stop bit. | 2-3 || || Temperature the primary display shows (16 bits signed little endian)10 KB (1,386 words) - 19:52, 1 January 2014
- | uncertain purpose, probably parity and stop bits specs, often omitted, or 0x00 is sent | number of data bits (encoded, values 0-3 translate to 5-8 data bits)3 KB (542 words) - 18:01, 15 June 2019
- ...p to 8 probes worth of data, one sample per bit. MSB = first probe. Unused bits are set to zero. ...to 16 probes worth of data, one sample per bit. MSB = first probe. Unused bits are set to zero.6 KB (998 words) - 21:41, 4 February 2014
- ...#Frame_formats Wikipedia]). Baudrate defaults to 9600, 1 start bit, 8 data bits, no checkbits and 1 stop bit. Registers are 16bits, bigendian. | Output Power high bits8 KB (1,162 words) - 17:23, 6 June 2021
- * 7 data bits * 1 or 2 stop bits, configurable via DIP switch3 KB (380 words) - 17:57, 2 November 2014
- * '''16 bits ADC''': [http://www.ti.com/product/ads8327 TI ADS8327] ([http://www.ti.com/ * '''16 bits DAC''': [http://www.ti.com/product/dac8831 BB DAC8831] ([http://www.ti.com/6 KB (798 words) - 20:09, 9 July 2015
- ...4 probes:''' Bit 3 is the value of probe 4, bit 0 is the value of probe 1. Bits[7:4] are probes 4..1 respectively. ...value of probe 2, bit 0 is the value of probe 1. Bits[7:6], bits[5:4], and bits[3:2] are probes 2..1 respectively.5 KB (802 words) - 10:10, 27 April 2013
- ...than "normal" for the diode mode, see below. The '''MEA5''' to '''MEA1''' bits are inputs of the FS9922-DMM4 chip, controlled by the position of the mode ..." user-defined bit will be set (but '''not''' the "voltage" and/or "diode" bits, as one would expect). Thus, some [http://sigrok.org/gitweb/?p=libsigrok.gi4 KB (492 words) - 20:51, 20 December 2016
- | vertical_resolution = 8 bits (HiRes up to 16 bits)3 KB (378 words) - 18:50, 7 January 2020
- ...than "normal" for the diode mode, see below. The '''MEA5''' to '''MEA1''' bits are inputs of the FS9922-DMM4 chip, controlled by the position of the mode ..." user-defined bit will be set (but '''not''' the "voltage" and/or "diode" bits, as one would expect). Thus, some [http://sigrok.org/gitweb/?p=libsigrok.gi4 KB (529 words) - 00:41, 4 September 2013
- The device communicates at 115200 baud, no parity, 8 data bits, and 1 stop bit (115200/8n1). - Date. Byte 6: Year; Byte 7: Month; Byte 8: Day; Byte 9: 2 bits unknown, 6 bits for Hour; Byte 10: Minutes; Byte 11: Seconds.5 KB (689 words) - 21:23, 3 December 2016
- | Bits | Bits4 KB (539 words) - 21:09, 17 January 2015