Search results
Jump to navigation
Jump to search
- ...ased DAQ with 8 analog inputs (12 bits, max. 10kS/s), 2 analog outputs (12 bits, 150Hz update rate), and 12 digital I/Os.868 bytes (119 words) - 18:46, 8 June 2013
File:PulseViewMfm2.jpg Screen capture of PulseView with mfm decoder showing decoded windows, bits, bytes, and fields.(654 × 320 (92 KB)) - 20:44, 21 April 2017- ! STATUS bits ! OPTION1 bits2 KB (236 words) - 02:04, 17 January 2014
File:Iebus-mode2-frame.png IEBus Mode 2 frame start with the start bit visible as well as some data bits.(800 × 480 (19 KB)) - 14:46, 7 June 2023- ...clock signal. Rather, both devices have to agree on a baudrate (number of bits to be transmitted per second) beforehand. Baudrates can be arbitrary in the * Between 5 and 9 '''data bits'''.6 KB (949 words) - 18:51, 30 January 2018
- * bits 0-9 are the value, with encoding as shown below * bits 13 is always 1, bits 14-15 are always 04 KB (627 words) - 02:00, 7 March 2017
- * 8 data bits (LSB-first) | Boiler bits command ** ***4 KB (456 words) - 08:12, 11 April 2018
- All data bytes on SDA are exactly 8 bits long (transmitted MSB-first). Each byte has to be followed by a 9th ACK/NAC ...nts to talk to. Slave addresses are 7 bits long (MSB-first). After those 7 bits, a data direction bit is sent. If the bit is low that indicates a WRITE ope3 KB (449 words) - 18:45, 7 December 2019
- * '''RAM''': SB61L256, 768x8-Bits STATIC CMOS RAM646 bytes (94 words) - 02:49, 24 July 2014
- ...''38400 baud''', with '''8n2''' settings (8 data bits, no parity, two stop bits).2 KB (257 words) - 07:51, 10 March 2013
- | Number of data bits | Number of stop bits.4 KB (562 words) - 18:13, 2 November 2014
- ...e (synchronous or asynchronous) parallel buses with various number of data bits/probes, an optional clock, and an optional select/enable/reset line. ...case can extract data values from parallel busses (memory addresses, data bits, including multiplexed transfer).2 KB (308 words) - 22:18, 11 November 2020
- ...s are assumed to be low (0). Users can specify the number's total width in bits. This allows to grab just a few signals of a wider bus, and see if there is * Total bits count: a user provided number, or automatic when 0 (derived from connected3 KB (472 words) - 20:28, 20 July 2020
- ...k how the data is presented. It supports two lengths 4 bits (nibble) and 8 bits (byte). It also allows numbers to be displayed as hexadecimal or binary cod3 KB (467 words) - 14:49, 13 October 2018
- ;Preamble: there are first 32 high bits. Some PHY's allow this to be shorter under certain conditions, but this isn ;PHY address: 5 bits to select the PHY being addressed. Under certain contexts 0 is a broadcast3 KB (492 words) - 11:03, 10 October 2023
- ...re the decimal point is '''not''' displayed (bit 7 is not set). All other bits except for bit 6 (segment A, see above) are set, i.e. the respective LCD se Bytes 7 to 10: Next four bits are the big LCD numbers, from right to left, in the format already specifie5 KB (654 words) - 23:03, 15 October 2015
- | vertical_resolution = 8 bits (HiRes up to 16 bits)3 KB (336 words) - 14:07, 9 January 2020
- Data is sent on the serial port at 9600 baud with 8 data bits, no parity, 1 stop bit. | 2-3 || || Temperature the primary display shows (16 bits signed little endian)10 KB (1,386 words) - 19:52, 1 January 2014
- | uncertain purpose, probably parity and stop bits specs, often omitted, or 0x00 is sent | number of data bits (encoded, values 0-3 translate to 5-8 data bits)3 KB (542 words) - 18:01, 15 June 2019
- | :01 ||bgcolor=#ffccff| 1 ||colspan=2 rowspan=14| Civil warning bits, provided by the<br>''Bundesamt für Bevölkerungsschutz<br>und Katastrophe ...||colspan=2 bgcolor=#ffffcc| P1 ||bgcolor=#ffffcc| Even parity over minute bits 21–28.7 KB (817 words) - 18:35, 25 April 2015