Difference between revisions of "Fx2grok"

From sigrok
Jump to navigation Jump to search
(fx2grok-tiny 0.1 is not working, 0.2 will fix this.)
(Add a link to esden's GitHub repository for the fx2grok-flat, and start on a 16-channel fx2grok-wide)
Line 1: Line 1:
{{lowercase}}
{{lowercase}}
The '''fx2grok''' family consists of three devices (fx2grok-flat, fx2grok-tiny, fx2grok-bga) of '''very small''', Open Hardware FX2-based logic analyzers.
The '''fx2grok''' family consists of four devices (fx2grok-flat, fx2grok-tiny, fx2grok-bga, fx2grok-wide) of '''very small''', Open Hardware FX2-based logic analyzers.


The schematics and layouts are done from scratch in [http://kicad-pcb.org Kicad], and are released under the [https://creativecommons.org/licenses/by-sa/3.0/ CC-BY-SA 3.0] or [https://creativecommons.org/licenses/by-sa/4.0/ CC-BY-SA 4.0] license.
The schematics and layouts are done from scratch in [http://kicad-pcb.org Kicad], and are released under the [https://creativecommons.org/licenses/by-sa/3.0/ CC-BY-SA 3.0] or [https://creativecommons.org/licenses/by-sa/4.0/ CC-BY-SA 4.0] license.


Using the open-source [[fx2lafw]] firmware (and sigrok, of course) you can use these devices as 8-channel logic analyzers.
Using the open-source [[fx2lafw]] firmware (and sigrok, of course) you can use these devices as 8-channel(Or 16-channel, for the fx2grok-wide) logic analyzers.


== Device comparison ==
== Device comparison ==
Line 13: Line 13:
|- bgcolor="#6699ff"
|- bgcolor="#6699ff"
! align="left" width="10%" | Item
! align="left" width="10%" | Item
! align="left" width="30%" | fx2grok-flat
! align="left" width="22.5%" | fx2grok-flat
! align="left" width="30%" | fx2grok-tiny
! align="left" width="22.5%" | fx2grok-tiny
! align="left" width="30%" | fx2grok-bga
! align="left" width="22.5%" | fx2grok-bga
! align="left" width="22.5%" | fxgrok-wide


|-
|-
Line 33: Line 34:
* "Just for fun" project, doesn't have to be practical
* "Just for fun" project, doesn't have to be practical
* Sacrifices even more things for reduced size
* Sacrifices even more things for reduced size
|
* Small, but 16 channels
* [https://en.wikipedia.org/wiki/Open-source_hardware Open Hardware]
* Reliable and convenient, with a few more channels


|-
|-
Line 39: Line 44:
| Uwe Hermann
| Uwe Hermann
| Uwe Hermann
| Uwe Hermann
| Ryan "Izzy" Bales, based off of Piotr Esden-Tempski's fx2grok-flat


|-
|-
Line 44: Line 50:
| CC-BY-SA 4.0
| CC-BY-SA 4.0
| CC-BY-SA 3.0 <sup>1</sup>
| CC-BY-SA 3.0 <sup>1</sup>
| CC-BY-SA 4.0
| CC-BY-SA 4.0
| CC-BY-SA 4.0


Line 50: Line 57:
| tbd
| tbd
| 13mm x 13mm
| 13mm x 13mm
| tbd
| tbd
| tbd


Line 57: Line 65:
| 8
| 8
| tbd
| tbd
| 16


|-
|-
Line 69: Line 78:
* 5mil traces, 6mil trace clearance
* 5mil traces, 6mil trace clearance
* 8mil via drill hole diameter, 5mil annular ring
* 8mil via drill hole diameter, 5mil annular ring
| tbd
| tbd
| tbd


Line 76: Line 86:
| Cypress CY7C68013A-56LTXC, QFN, 8mm x 8mm
| Cypress CY7C68013A-56LTXC, QFN, 8mm x 8mm
| Cypress CY7C68013A-56BAXC, BGA, 5mm x 5mm
| Cypress CY7C68013A-56BAXC, BGA, 5mm x 5mm
| Cypress CY7C68013A-56LTXC, QFN, 8mm x 8mm


|-
|-
Line 82: Line 93:
| None whatsoever
| None whatsoever
| None whatsoever
| None whatsoever
| 100Ω on each probe, 4x DSILC6-4 for all probes, 1x USBLC6-2 for USB


|-
|-
| bgcolor="#6699ff" | '''24MHz crytal'''
| bgcolor="#6699ff" | '''24MHz crytal'''
| tbd
| tbd
| tbd
| tbd
| tbd
Line 94: Line 107:
| USB Micro-B SMD
| USB Micro-B SMD
| tbd
| tbd
| USB Micro-B SMD


|-
|-
Line 100: Line 114:
| 2x5 1.27mm PCB-edge connector
| 2x5 1.27mm PCB-edge connector
| tbd
| tbd
| 2x 2x5 1.27mm PCB-edge connectors


|-
|-
Line 106: Line 121:
| None, default Cypress VID/PID 04b4:8613
| None, default Cypress VID/PID 04b4:8613
| None, default Cypress VID/PID 04b4:8613
| None, default Cypress VID/PID 04b4:8613
| Yes, sigrok fx2lafw (16-channel) VIP/PID 1d50:608d


|-
|-
Line 112: Line 128:
| Only 0402
| Only 0402
| tbd
| tbd
| Mostly 0402, some 0603


|-
|-
Line 118: Line 135:
| 1x 0402 LED on PA0
| 1x 0402 LED on PA0
| tbd
| tbd
| 1x 0603 LED on PA0


|}
|}
Line 289: Line 307:
* [http://www.cypress.com/documentation/application-notes/an15456-guide-successful-ez-usb-fx2lp-hardware-design AN15456 - Guide to a Successful EZ-USB FX2LP Hardware Design] ([http://www.cypress.com/file/135006/download PDF])
* [http://www.cypress.com/documentation/application-notes/an15456-guide-successful-ez-usb-fx2lp-hardware-design AN15456 - Guide to a Successful EZ-USB FX2LP Hardware Design] ([http://www.cypress.com/file/135006/download PDF])
* esden's [https://www.youtube.com/playlist?list=PLOF903IIpqjOwHIjT7VFqbxBhEHG8v5__ series of videos] on the fx2grok-flat design (schematics, PCB, with background information and almost a KiCad tutorial)
* esden's [https://www.youtube.com/playlist?list=PLOF903IIpqjOwHIjT7VFqbxBhEHG8v5__ series of videos] on the fx2grok-flat design (schematics, PCB, with background information and almost a KiCad tutorial)
* esden's [https://github.com/esden/fx2grok/ GitHub repository] with the KiCad project files for the fx2grok-flat(In the "flat" branch)
* Ryan's [https://github.com/izzy84075/fx2grok GitHub repository] with the KiCad project files for the fx2grok-wide(In the "wide" branch)

Revision as of 23:58, 3 October 2017

The fx2grok family consists of four devices (fx2grok-flat, fx2grok-tiny, fx2grok-bga, fx2grok-wide) of very small, Open Hardware FX2-based logic analyzers.

The schematics and layouts are done from scratch in Kicad, and are released under the CC-BY-SA 3.0 or CC-BY-SA 4.0 license.

Using the open-source fx2lafw firmware (and sigrok, of course) you can use these devices as 8-channel(Or 16-channel, for the fx2grok-wide) logic analyzers.

Device comparison

Note: All of this is work in progress and might change at any time!

Item fx2grok-flat fx2grok-tiny fx2grok-bga fxgrok-wide
Goals 2
  • Even smaller
  • Open Hardware
  • "Just for fun" project, doesn't have to be practical
  • Sacrifices a lot of things for reduced size
  • Smallest-possible
  • Open Hardware
  • "Just for fun" project, doesn't have to be practical
  • Sacrifices even more things for reduced size
  • Small, but 16 channels
  • Open Hardware
  • Reliable and convenient, with a few more channels
Author Piotr Esden-Tempski Uwe Hermann Uwe Hermann Ryan "Izzy" Bales, based off of Piotr Esden-Tempski's fx2grok-flat
Hardware license CC-BY-SA 4.0 CC-BY-SA 3.0 1 CC-BY-SA 4.0 CC-BY-SA 4.0
Size tbd 13mm x 13mm tbd tbd
Logic channels 8 8 tbd 16
Layout specs
  • Components only soldered on one side
  • tbd
  • Double-sided 2-layer PCB/layout
  • Components soldered on both sides
  • 0.8mm PCB thickness
  • 5mil traces, 6mil trace clearance
  • 8mil via drill hole diameter, 5mil annular ring
 tbd tbd
Cypress FX2 Cypress CY7C68013A-56LTXC, QFN, 8mm x 8mm Cypress CY7C68013A-56LTXC, QFN, 8mm x 8mm Cypress CY7C68013A-56BAXC, BGA, 5mm x 5mm Cypress CY7C68013A-56LTXC, QFN, 8mm x 8mm
Input protection 100Ω on each probe, 2x DSILC6-4 for all probes, 1x USBLC6-2 for USB None whatsoever None whatsoever 100Ω on each probe, 4x DSILC6-4 for all probes, 1x USBLC6-2 for USB
24MHz crytal tbd tbd tbd tbd
USB connector USB Micro-B SMD USB Micro-B SMD tbd USB Micro-B SMD
Probe connector 2x5 1.27mm PCB-edge connector 2x5 1.27mm PCB-edge connector tbd 2x 2x5 1.27mm PCB-edge connectors
EEPROM Yes, sigrok fx2lafw (8-channel) VID/PID 1d50:608c None, default Cypress VID/PID 04b4:8613 None, default Cypress VID/PID 04b4:8613 Yes, sigrok fx2lafw (16-channel) VIP/PID 1d50:608d
Passives Mostly 0402, some 0603 Only 0402 tbd Mostly 0402, some 0603
LED 1x 0603 LED on PA0 1x 0402 LED on PA0 tbd 1x 0603 LED on PA0

1 Historical reasons.
2 Optional goal: Make a tiny 3D-printed enclosure, and/or an "enclosure" using resin (example) with the device (including probes) ideally looking similar to the sigrok logo in the end.

What is NOT the goal?

As you may know, there are tons of FX2-based logic analyzers (and tons of clones) already. There's not much use in creating yet another "standard" device.

The goal of this little hobby project is thus NOT to make a better device, or to make a cheaper device, or anything like that. The only goal is to have it as tiny as possible (it's more of a "just for fun" project).

Status

Work in progress, untested, may or may not work!

The first PCB, fx2grok-tiny 0.1, has been found to be non-working. A fixed 0.2 version is currently being worked on.

Download

The schematics, PCB layout and Gerber files are available from the fx2grok git repository: 

$ git clone git://sigrok.org/fx2grok

Photos

Schematics, PCB layout, 3D preview

fx2grok-tiny 0.1:

  • Schematics

  • PCB layout

  • 3D preview, top

  • 3D preview, bottom

Cable and connector variants

Samtec SFSD-05-28-H-10.00-SR + TFM-105-01-L-D:

  • Samtec SFSD-05-28-H-10.00-SR

  • Connector with notch

  • Crimp parts

  • Crimp

  • Finished cable

  • Cable with probes

  • Samtec TFM-105-01-L-D

  • Samtec TFM-105-01-L-D

  • Cable connected

  • Cable + pinheader

Hand-soldered ribbon cable:

  • Ribbon cable

  • Individual wires

  • Soldered connector

  • Kapton tape

  • Finished cable

  • Cable comparison

Assembly

  • Size comparison

Bill of materials

fx2grok-tiny 0.1

Note: All prices are for single quantities, most parts get a lot cheaper if you buy higher quantities.

Qty Device Footprint Size Value Refdes Digikey Mouser Comments
Required parts
1 Cypress CY7C68013A-56LTXC QFN-56 8mm x 8mm — IC1 10.05€ 10.30€ Main chip. Alternatives:
1 Amphenol FCI 10118192-0001LF custom 9.8mm x 5.6mm — U1 0.38€ 0.35€ USB Micro-B SMD connector
1 Murata XRCGB24M000FAN00R0 custom 2mm x 1.6mm 24MHz Y1 0.29€ 0.46€ 24MHz crystal
1 Micrel MIC5504-3.3YM5-TR SOT-23-5 2.9mm x 1.6mm 3.3V U2 0.10€ 0.10€ 3.3V LDO
4 Yageo RC0402JR-072R7L 0402 0.25mm x 0.125mm 2.7 kΩ R2, R3, R4, R5 0.08€ 0.08€ Resistor
1 Samsung RC1005J104CS 0402 0.25mm x 0.125mm 100 kΩ R1 0.08€ — Resistor
8 Samsung CL05A104KP5NNNC 0402 0.25mm x 0.125mm 100nF C2, C5, C7, C8, C10-C13 0.08€ — Ceramic capacitor
3 Taiyo Yuden JMK105BJ105KV-F 0402 0.25mm x 0.125mm 1uF C1, C14, C16 0.08€ 0.10€ Ceramic capacitor
2 Murata GRM155R61A225KE95D 0402 0.25mm x 0.125mm 2.2uF C3, C6 0.08€ 0.08€ Ceramic capacitor
2 Samsung CL05C120JB5NNNC 0402 0.25mm x 0.125mm 12pF C4, C9 0.08  — Ceramic capacitor
1 Vishay VLMB1500-GS08 0402 0.25mm x 0.125mm — D1 0.34€ 0.51€ LED
Optional parts / variants
1 Amphenol FCI 20021111-00010T4LF custom — — P1/P2 0.53€ 0.55€ 5x2 through-hole pin header (1.27mm pitch), could soldered to the PCB (5 pins per side)
1 Amphenol FCI 20021311-00010T4LF custom — — — 0.68€ 0.69€ 5x2 connector/receptacle (1.27mm pitch), could be used for soldering the probe cable/wires
1 Samtec TFM-105-01-L-D custom — — P1/P2 0.53€ — 5x2 through-hole pin header (1.27mm pitch) with a notch, soldered to the PCB (5 pins per side), match for the Samtec SFSD-05-28-H-10.00-SR cable below
1 Samtec SFSD-05-28-H-10.00-SR custom — — — 4.77€ — Potential probe cable, needs some crimping

Note: C15 is missing and there is a C16, which is correct. C15 was removed and the numbering wasn't reset.

Resources

Retrieved from "https://sigrok.org/w/index.php?title=Fx2grok&oldid=12791"