Difference between revisions of "Device cables"

From sigrok
Jump to navigation Jump to search
Line 106: Line 106:
== V&A cable ==
== V&A cable ==


TODO.
The [http://www.mastech.com.cn/html/en/products-accessories.htm V&A VA4000] is a USB PC interface cable for various V&A multimeters.
 
It seems there have been at least two different revisions of the cable. The older one used a Sunplus SPCP825 USB-to-serial chip (see [http://www.mikrocontroller.net/topic/160215#2032176 here], [http://multimeter.schewe.com/ here], or also check the drivers from [http://www.elv.de/digital-multimeter-va18b-mit-pc-link.html here]), the newer revisions use a Prolific PL2303HX chip.
 
'''Hardware''' (old cable version):
 
* '''USB to serial chip''': Sunplus SPCP825
* '''Crystal''': ?
 
'''Hardware''' (new cable version):
 
* '''USB to serial chip''': Prolific PL2303HX YR0903A
* '''Crystal''': 12MHz
 
''' Works with''':
* TODO.
 
''' Where to buy''':
* TODO.


<gallery>
<gallery>

Revision as of 19:38, 22 July 2012

This page contains information and teardown photos of various multimeter PC connectivity cables and adapters.

Agilent U1173A

TODO.

The Agilent U1173A IR-USB cable. It's based on a Prolific PL2303HX USB-serial chip.

Agilent U1177A

TODO.

The Agilent U1177A IR-bluetooth interface module.

Brymen BU-86X

TODO.

Fluke IR189USB

The Fluke IR189USB is a USB interface cable for Fluke-18X and 28X DMMs.

Fluke OC4USB

The Fluke OC4USB is a USB interface cable for the Fluke 120 series, 190 series scope meter, and the 430 series power quality analyzer.

Resources:

Fluke PM9080

The Fluke PM9080 is an RS232 interface cable for "digital hard-copy output to serial printer or remote control via a PC". It works for the Fluke scope meter test tools, power harmonics analyzers, graphical multimeters and multifunction counters.

The max. supported baud rate is 57600.

Resources:

GreenLee DMSC-9U

TODO.

MASTECH MAS34X cable

TODO.

UNI-T UT-D01

TODO.

Where to buy: Reichelt, Conrad/Voltcraft

UNI-T UT-D04

The UNI-T UT-D04 is a USB/HID cable for various UNI-T multimeters (and rebranded models) with PC connectivity.

Hardware:

  • WCH CH9325

Works with:

  • UNI-T UT61D/...
  • Voltcraft VC820/VC840/...
  • TODO

Where to buy:

V&A cable

The V&A VA4000 is a USB PC interface cable for various V&A multimeters.

It seems there have been at least two different revisions of the cable. The older one used a Sunplus SPCP825 USB-to-serial chip (see here, here, or also check the drivers from here), the newer revisions use a Prolific PL2303HX chip.

Hardware (old cable version):

  • USB to serial chip: Sunplus SPCP825
  • Crystal: ?

Hardware (new cable version):

  • USB to serial chip: Prolific PL2303HX YR0903A
  • Crystal: 12MHz

Works with:

  • TODO.

Where to buy:

  • TODO.