Difference between revisions of "Saleae Logic16/Firmware"
Jump to navigation
Jump to search
(→Endpoint 1 OUT (EP1_OUT) handler: Explain operation 0x80) |
|||
| Line 188: | Line 188: | ||
| 0x80 | | 0x80 | ||
| 0x205 | | 0x205 | ||
| Transmit N (1-31) 16-bit words to the FPGA. The second byte of the packet encodes N. Data is sent on PA6, with rising edges of PA5 to clock | | Transmit N (1-31) 16-bit words to the FPGA. The second byte of the packet encodes N. Data is sent on PA6, MSB first, with rising edges of PA5 to clock the bits out. During the transfer, PA4 is held low. The most significant bit (b15) of each word must be 0. | ||
|- | |- | ||
| 0x81 | | 0x81 | ||
Revision as of 21:04, 24 July 2013
The following information is related to the vendor firmware included with the version 1.1.15 of the vendor application "Logic".
Interrupt handlers
The following interrupt handlers are installed. If the address is absent, it means the handler just returns (RETI) without performing any action.
| RESET | 0x0000 |
| TF2 | 0x0e65 |
| RESUME | 0x002e |
| SUDAV | 0x0ae8 |
| SOF | 0x13d2 |
| SUTOK | 0x13bf |
| SUSPEND | 0x13aa |
| USB_RESET | 0x130b |
| HISPEED | 0x12df |
| EP0ACK | |
| EP0_IN | |
| EP0_OUT | |
| EP1_IN | |
| EP1_OUT | 0x115d |
| EP2 | 0x11a2 |
| EP4 | |
| EP6 | |
| EP8 | |
| IBN | |
| EP0PING | |
| EP1PING | |
| EP2PING | |
| EP4PING | |
| EP6PING | |
| EP8PING | |
| ERRLIMIT | |
| EP2ISOERR | |
| EP4ISOERRF | |
| EP6ISOERR | |
| EP8ISOERRF | |
| EP2PF | |
| EP4PF | |
| EP6PF | |
| EP8PF | |
| EP2EF | |
| EP4EF | |
| EP6EF | |
| EP8EF | |
| EP2FF | 0x11e7 |
| EP4FF | |
| EP6FF | |
| EP8FF | |
| GPIFDONE | |
| GPIFWF |
Endpoint 1 OUT (EP1_OUT) handler
After decrypting the OUT packet, processing of the packet proceeds depending on the first byte of the packet, which selects the operation.
| Byte | Handler | Operation |
|---|---|---|
| 1 | 0x14f | ? |
| 2 | 0x157 | ? |
| 6 | 0x15f | ? |
| 7 | 0x1b3 | ? |
| 0x7a | 0x309 | ? |
| 0x7b | 0x346 | ? |
| 0x7c | 0x282 | ? |
| 0x7d | 0x2aa | ? |
| 0x7e | 0x2cf | ? |
| 0x7f | 0x2e4 | ? |
| 0x80 | 0x205 | Transmit N (1-31) 16-bit words to the FPGA. The second byte of the packet encodes N. Data is sent on PA6, MSB first, with rising edges of PA5 to clock the bits out. During the transfer, PA4 is held low. The most significant bit (b15) of each word must be 0. |
| 0x81 | 0x23b | ? |
| 0x82 | 0x3a3 | ? |
| others | 0x3c7 | Do nothing |