Difference between revisions of "APPA 500 Series"
m (Sefram 7357 / sefram 7351->legacy) |
m |
||
| Line 16: | Line 16: | ||
|- | |- | ||
! Model | ! Model | ||
! | ! Compatible devices | ||
! Optical RS232/USB | ! Optical RS232/USB | ||
! Bluetooth LE | ! Bluetooth LE | ||
| Line 82: | Line 82: | ||
USB cable of APPA 500 Series based meters: [[Device cables#APPA IC-300U|APPA IC-300U]] | USB cable of APPA 500 Series based meters: [[Device cables#APPA IC-300U|APPA IC-300U]] | ||
By the datasheet and feature list it seems to be that [[APPA 200 Series| | By the datasheet and feature list it seems to be that [[APPA 200 Series|208]] is the bench version of the 506 handheld meters. Extra features of the 208 compared to the 506: AC 100-240V power supply (but it can still run on batteries), higher frequency measurement range at higher precision (4 MHz), duty cycle measurement and an extra button for display light instead of the automatic light sensor of the 506. | ||
''Important:'' Some of the older models of the Series 503/505, like the [[Voltcraft VC-950]], don't support the new APPA communication protocol with model identification. For these devices you need to manually select the appropriate driver (voltcraft-vc950, appa-500-legacy, etc.) in sigrok manually. | ''Important:'' Some of the older models of the Series 503/505, like the [[Voltcraft VC-950|VC-950]], don't support the new APPA communication protocol with model identification. For these devices you need to manually select the appropriate driver (voltcraft-vc950, appa-500-legacy, etc.) in sigrok manually. | ||
Revision as of 09:39, 23 November 2020
 | |
| Status | in progress |
|---|---|
| Source code | appa-dmm |
| IEC 61010-1 | CAT IV (600V) / CAT III (1000V) |
| Connectivity | Optical (RS232/USB), Bluetooth LE (depending on model) |
| Website | appatech.com |
The APPA 500 is a wide range of 6.000 to 100.000 counts, CAT III (1000V) / CAT IV (600V) handheld digital multimeters with optical RS232 / USB connectivity. Model variant 506B also has built-in Bluetooth LE connectivity.
For more information on the sigrok-integration see: APPA Multimeters in sigrok using the appa-dmm driver
| Model | Compatible devices | Optical RS232/USB | Bluetooth LE | Support level | Comments |
|---|---|---|---|---|---|
| APPA 501 | X | implemented, untested | |||
| APPA 502 | X | implemented, untested | |||
| APPA 503 | CMT 3503 IDEAL 61-497 ISO-TECH IDM503 Sefram 7351 Voltcraft VC-930 |
X | implemented, untested | ||
| APPA 505 | IDEAL 61-498 ISO-TECH & RS PRO IDM505 Sefram 7355 Voltcraft VC-950 |
X | good | ||
| APPA 506 | X | good | |||
| APPA 506B | BENNING MM 12 Sefram 7352B |
X | X | good | |
| APPA 507 | CMT 3507 HT Instruments HT8100 Sefram 7357 |
X | implemented, untested | Unknown ID |
USB cable of APPA 500 Series based meters: APPA IC-300U
By the datasheet and feature list it seems to be that 208 is the bench version of the 506 handheld meters. Extra features of the 208 compared to the 506: AC 100-240V power supply (but it can still run on batteries), higher frequency measurement range at higher precision (4 MHz), duty cycle measurement and an extra button for display light instead of the automatic light sensor of the 506.
Important: Some of the older models of the Series 503/505, like the VC-950, don't support the new APPA communication protocol with model identification. For these devices you need to manually select the appropriate driver (voltcraft-vc950, appa-500-legacy, etc.) in sigrok manually.