Difference between revisions of "Intronix Logicport LA1034"

From sigrok
Jump to navigation Jump to search
m (Use infobox.)
Line 1: Line 1:
[[File:Intronix_Logicport.jpg|thumb|right|Intronix Logicport]]
{{Infobox logic analyzer
| image            = [[File:Intronix_Logicport.png|180px]]
| name            = Intronix Logicport LA1034
| status          = planned
| source_code_dir  =
| channels        = 34
| samplerate      = 500MHz
| samplerate_state = 200MHz
| triggers        = edge, pattern, bus value, occurence count, duration
| voltages        = -40V — +40V (max. 15V peak-to-peak)
| threshold        = configurable: -6V — +6V (50mV resolution)
| memory          = 2048samples/ch
| compression      = yes, "realtime sample compression" (only up to a samplerate of 200MHz)
| website          = [http://www.pctestinstruments.com pctestinstruments.com]
}}


The [http://www.pctestinstruments.com/ Intronix Logicport LA1034] is an FPGA-based logic analyzer, capable of sampling data on 34 channels at up to 500MHz. It has very limited memory, however, and can only use compression at rates up to 200MHz.
The '''Intronix Logicport LA1034''' is a USB-based, 34-channel logic analyzer with up to 500MHz sampling rate.
 
The device is capable of sampling data on 34 channels at up to 500MHz. It has very limited memory, however, and can only use compression at rates up to 200MHz.


See [[Intronix Logicport/Info]] for some more details (such as '''lsusb -vvv''' output) on the device.
See [[Intronix Logicport/Info]] for some more details (such as '''lsusb -vvv''' output) on the device.


== Hardware ==
== Hardware ==
The board is mostly composed of the following components:


* Altera EP1C4F324C6 (FPGA)
* Altera EP1C4F324C6 (FPGA)
* FTDI FT245BL (USB interface)
* FTDI FT245BL (USB interface)
* AT93C46 (small EEPROM, for storing the FTDI's USB vendor and product ID)
* Atmel AT93C46 (small EEPROM, for storing the FTDI's USB vendor and product ID)


== Photos ==
== Photos ==


<gallery>
<gallery>
File:Intronix_Logicport_with_probes.jpg|<small>Intronix Logicport with probes connector attached</small>
File:Intronix_Logicport.jpg|<small>Device, top</small>
File:Intronix_Logicport_PCB_Front.jpg|<small>PCB front view</small>
File:Intronix_Logicport_with_probes.jpg|<small>Device with probes connector attached</small>
File:Intronix_Logicport_PCB_Back.jpg|<small>PCB back view</small>
File:Intronix_Logicport_PCB_Front.jpg|<small>PCB, front view</small>
File:Intronix_Logicport_PCB_Back.jpg|<small>PCB, back view</small>
File:Intronix_Logicport_Circuit_Detail.jpg|<small>Circuit detail</small>
File:Intronix_Logicport_Circuit_Detail.jpg|<small>Circuit detail</small>
</gallery>
</gallery>
== Protocol ==
Work in progress.


== Resources ==
== Resources ==

Revision as of 13:22, 11 May 2013

Intronix Logicport LA1034
Intronix Logicport.png
Status planned
Channels 34
Samplerate 500MHz
Samplerate (state) 200MHz
Triggers edge, pattern, bus value, occurence count, duration
Min/max voltage -40V — +40V (max. 15V peak-to-peak)
Threshold voltage configurable: -6V — +6V (50mV resolution)
Memory 2048samples/ch
Compression yes, "realtime sample compression" (only up to a samplerate of 200MHz)
Website pctestinstruments.com

The Intronix Logicport LA1034 is a USB-based, 34-channel logic analyzer with up to 500MHz sampling rate.

The device is capable of sampling data on 34 channels at up to 500MHz. It has very limited memory, however, and can only use compression at rates up to 200MHz.

See Intronix Logicport/Info for some more details (such as lsusb -vvv output) on the device.

Hardware

  • Altera EP1C4F324C6 (FPGA)
  • FTDI FT245BL (USB interface)
  • Atmel AT93C46 (small EEPROM, for storing the FTDI's USB vendor and product ID)

Photos

Protocol

Work in progress.

Resources