sigrok - User contributions [en]

Saleae Logic Pro 16/Info

2014-11-04T20:50:40Z

Balrog: clarification

== lsusb on USB 2.0 bus (before firmware upload) ==


$ '''lsusb -vvv'''
Bus 001 Device 004: ID '''21a9:1006'''
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x21a9
idProduct 0x1006
bcdDevice 1.00
iManufacturer 1 Cypress
iProduct 2 WestBridge
iSerial 3 0000000004BE
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 18
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 200mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 0
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0000
(Bus Powered)


== lsusb on USB 2.0 bus (after firmware upload) ==



$ '''lsusb -vvv'''
Bus 001 Device 005: ID '''21a9:1006'''
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x21a9
idProduct 0x1006
bcdDevice 0.00
iManufacturer 1 '''Saleae'''
iProduct 2 '''Logic Pro'''
iSerial 4 SERNUM
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 39
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 176mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 '''EP 1 OUT'''
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 '''EP 1 IN'''
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 '''EP 2 IN'''
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 3.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 9
bNumConfigurations 1
Device Status: 0x0000
(Bus Powered)

Saleae Logic Pro 16/Info

2014-11-04T20:49:24Z

Balrog: formatting

== lsusb (before firmware upload) ==


$ '''lsusb -vvv'''
Bus 001 Device 004: ID '''21a9:1006'''
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x21a9
idProduct 0x1006
bcdDevice 1.00
iManufacturer 1 Cypress
iProduct 2 WestBridge
iSerial 3 0000000004BE
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 18
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 200mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 0
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0000
(Bus Powered)


== lsusb (after firmware upload) ==



$ '''lsusb -vvv'''
Bus 001 Device 005: ID '''21a9:1006'''
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x21a9
idProduct 0x1006
bcdDevice 0.00
iManufacturer 1 '''Saleae'''
iProduct 2 '''Logic Pro'''
iSerial 4 SERNUM
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 39
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 176mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 '''EP 1 OUT'''
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 '''EP 1 IN'''
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 '''EP 2 IN'''
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 3.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 9
bNumConfigurations 1
Device Status: 0x0000
(Bus Powered)

Saleae Logic Pro 16/Info

2014-11-04T20:48:12Z

Balrog: Add info page

Saleae Logic Pro 16

2014-11-04T20:40:37Z

Balrog: Add more info

{{Infobox logic analyzer
| image = [[File:Saleae Logic Pro 16 bottom.jpg|180px]]
| name = Saleae Logic Pro 16
| status = planned
| source_code_dir =
| channels = 16
| samplerate = 500/100/50/25/20MHz
| samplerate_state = —
| triggers = none (SW-only)
| voltages = -50 — 50V tolerant
| threshold = 1.2V to 5.5V digital, 0 to 10V analog
| memory = none
| compression = yes
| website = [https://www.saleae.com saleae.com]
}}

The '''Saleae Logic Pro 16''' is a USB 3.0-based, 16-channel logic analyzer with 100/50/32/16MHz sampling rate (at 3/6/9/16 enabled channels). It supports analog sampling on all 16 channels.

It is part of the second-generation Saleae Logic series, which consists of the Logic 4 and 8, and the Pro 8 and 16.

The case requires a '''Torx T9''' screwdriver to open.

See [[Saleae Logic Pro 16/Info]] for more details (such as '''lsusb -vvv''' output) about the device.

See [[Saleae Logic]] and [[Saleae Logic16]] for the predecessor products of the Saleae Logic Pro16.

== Hardware ==

* '''FPGA''': [http://www.xilinx.com/support/index.html/content/xilinx/en/supportNav/silicon_devices/fpga/spartan-6.html Xilinx Spartan-6 XC6SLX16], 14,579 logic elements ([http://www.xilinx.com/support/documentation/data_sheets/ds160.pdf family overview]) ([http://www.xilinx.com/support/documentation/data_sheets/ds162.pdf datasheet])
* '''USB interface chip''': [http://www.cypress.com/?mpn=CYUSB3014-BZXI Cypress CYUSB3014-BZXI (FX3)] ([http://www.cypress.com/?docID=50647 datasheet])
* '''ADCs''': 2x [https://www.hittite.com/products/view.html/view/HMCAD1100 Hittite Microwave HMCAD1100] ([https://www.hittite.com/content/documents/data_sheet/hmcad1100.pdf datasheet])
* '''32Kbit I2C EEPROM''': [http://www.microchip.com/wwwproducts/Devices.aspx?dDocName=en010774 24C32A] ([http://ww1.microchip.com/downloads/en/DeviceDoc/21709J.pdf datasheet])
* '''12x amplifiers''': [http://www.analog.com/en/high-speed-op-amps/high-speed-rail-to-rail-amplifiers/ada4891-4/products/product.html Analog Devices ADA4891-4] ([http://www.analog.com/static/imported-files/data_sheets/ADA4891-1_4891-2_4891-3_4891-4.PDF datasheet])
* This list is not yet complete.

There are several testpoints on the underside of the PCB. It is not yet certain what these are for. There is no visible JTAG header.

== Photos ==

<gallery>
File:Saleae Logic Pro 16 front.jpg|Device, front
File:Saleae Logic Pro 16 top.jpg|Device, top
File:Saleae Logic Pro 16 bottom.jpg|Device, bottom
File:Saleae Logic Pro 16 PCB front.jpg|PCB, top
File:Saleae Logic Pro 16 PCB rear.jpg|PCB, bottom
</gallery>

== Resources ==

* [http://support.saleae.com/hc/en-us/sections/200114124-get-started-using-the-saleae-logic-analyzer Manual]
* [http://www.saleae.com/downloads Vendor software]
* [http://support.saleae.com/hc/en-us/categories/200077184-sdks-automation-betas SDKs]

[[Category:Device]]
[[Category:Logic analyzer]]
[[Category:Oscilloscope]]
[[Category:Mixed-signal oscilloscope]]
[[Category:Planned]]

Saleae Logic Pro 16

2014-11-04T19:36:29Z

Balrog: removed irrelevant content

[[File:{{Infobox logic analyzer
| image = [[File:Saleae Logic Pro 16 bottom.jpg|180px]]
| name = Saleae Logic Pro 16
| status = unsupported
| source_code_dir =
| channels = 16
| samplerate = 500/100/50/25/20MHz
| samplerate_state = —
| triggers = none (SW-only)
| voltages = -50 — 50V tolerant
| threshold = 1.2V to 5.5V digital, 0 to 10V analog
| memory = none
| compression = yes
| website = [https://www.saleae.com]
}}

The '''Saleae Logic Pro 16''' is a USB 3.0-based, 16-channel logic analyzer with 100/50/32/16MHz sampling rate (at 3/6/9/16 enabled channels). It supports analog sampling on all 16 channels.
It is part of the second-generation Saleae Logic series, which consists of the Logic 4 and 8, and the Pro 8 and 16.

The case requires a '''Torx T9''' screwdriver to open.

See [[Saleae Logic]] and [[Saleae Logic16]] for the predecessor products of the Saleae Logic Pro16.

== Hardware ==

* '''FPGA''': [http://www.xilinx.com/support/index.html/content/xilinx/en/supportNav/silicon_devices/fpga/spartan-6.html Xilinx Spartan-6 XC6SLX16], 14,579 logic elements ([http://www.xilinx.com/support/documentation/data_sheets/ds160.pdf family overview]) ([http://www.xilinx.com/support/documentation/data_sheets/ds162.pdf datasheet])
* '''USB interface chip''': [http://www.cypress.com/?mpn=CYUSB3014-BZXI Cypress CYUSB3014-BZXI (FX3)] ([http://www.cypress.com/?docID=50647 datasheet])
* '''ADCs''' 2x [https://www.hittite.com/products/view.html/view/HMCAD1100 Hittite Microwave HMCAD1100] ([https://www.hittite.com/content/documents/data_sheet/hmcad1100.pdf datasheet])
* '''32Kbit I2C EEPROM''': [http://www.microchip.com/wwwproducts/Devices.aspx?dDocName=en010774 24C32A] ([http://ww1.microchip.com/downloads/en/DeviceDoc/21709J.pdf datasheet])
* '''12x Amplifiers''': [http://www.analog.com/en/high-speed-op-amps/high-speed-rail-to-rail-amplifiers/ada4891-4/products/product.html Analog Devices ADA4891-4] ([http://www.analog.com/static/imported-files/data_sheets/ADA4891-1_4891-2_4891-3_4891-4.PDF datasheet])
* This list is not yet complete.

There are several testpoints on the underside of the PCB. It is not yet certain what these are for. There is no visible JTAG header.

== Photos ==

<gallery>
File:Saleae Logic Pro 16 front.jpg|Device, front
File:Saleae Logic Pro 16 top.jpg|Device, top
File:Saleae Logic Pro 16 bottom.jpg|Device, bottom
File:Saleae Logic Pro 16 PCB front.jpg|PCB, top
File:Saleae Logic Pro 16 PCB rear.jpg|PCB, bottom

</gallery>

== Resources ==

* [http://support.saleae.com/hc/en-us/sections/200114124-get-started-using-the-saleae-logic-analyzer Manual]
* [http://www.saleae.com/downloads Vendor software]
* [http://support.saleae.com/hc/en-us/categories/200077184-sdks-automation-betas SDKs]

[[Category:Device]]
[[Category:Logic analyzer]]
[[Category:Supported]]

Saleae Logic Pro 16

2014-11-04T19:35:57Z

Balrog: fix typo

[[File:{{Infobox logic analyzer
| image = [[File:Saleae Logic Pro 16 bottom.jpg|180px]]
| name = Saleae Logic Pro 16
| status = unsupported
| source_code_dir =
| channels = 16
| samplerate = 500/100/50/25/20MHz
| samplerate_state = —
| triggers = none (SW-only)
| voltages = -50 — 50V tolerant
| threshold = 1.2V to 5.5V digital, 0 to 10V analog
| memory = none
| compression = yes
| website = [https://www.saleae.com]
}}

The '''Saleae Logic Pro 16''' is a USB 3.0-based, 16-channel logic analyzer with 100/50/32/16MHz sampling rate (at 3/6/9/16 enabled channels). It supports analog sampling on all 16 channels.
It is part of the second-generation Saleae Logic series, which consists of the Logic 4 and 8, and the Pro 8 and 16.

The case requires a '''Torx T9''' screwdriver to open.

See [[Saleae Logic16/Info]] for more details (such as '''lsusb -vvv''' output) about the device.

See [[Saleae Logic]] and [[Saleae Logic16]] for the predecessor products of the Saleae Logic Pro16.

== Hardware ==

* '''FPGA''': [http://www.xilinx.com/support/index.html/content/xilinx/en/supportNav/silicon_devices/fpga/spartan-6.html Xilinx Spartan-6 XC6SLX16], 14,579 logic elements ([http://www.xilinx.com/support/documentation/data_sheets/ds160.pdf family overview]) ([http://www.xilinx.com/support/documentation/data_sheets/ds162.pdf datasheet])
* '''USB interface chip''': [http://www.cypress.com/?mpn=CYUSB3014-BZXI Cypress CYUSB3014-BZXI (FX3)] ([http://www.cypress.com/?docID=50647 datasheet])
* '''ADCs''' 2x [https://www.hittite.com/products/view.html/view/HMCAD1100 Hittite Microwave HMCAD1100] ([https://www.hittite.com/content/documents/data_sheet/hmcad1100.pdf datasheet])
* '''32Kbit I2C EEPROM''': [http://www.microchip.com/wwwproducts/Devices.aspx?dDocName=en010774 24C32A] ([http://ww1.microchip.com/downloads/en/DeviceDoc/21709J.pdf datasheet])
* '''12x Amplifiers''': [http://www.analog.com/en/high-speed-op-amps/high-speed-rail-to-rail-amplifiers/ada4891-4/products/product.html Analog Devices ADA4891-4] ([http://www.analog.com/static/imported-files/data_sheets/ADA4891-1_4891-2_4891-3_4891-4.PDF datasheet])
* This list is not yet complete.

There are several testpoints on the underside of the PCB. It is not yet certain what these are for. There is no visible JTAG header.

== Photos ==

<gallery>
File:Saleae Logic Pro 16 front.jpg|Device, front
File:Saleae Logic Pro 16 top.jpg|Device, top
File:Saleae Logic Pro 16 bottom.jpg|Device, bottom
File:Saleae Logic Pro 16 PCB front.jpg|PCB, top
File:Saleae Logic Pro 16 PCB rear.jpg|PCB, bottom

</gallery>

== Resources ==

* [http://support.saleae.com/hc/en-us/sections/200114124-get-started-using-the-saleae-logic-analyzer Manual]
* [http://www.saleae.com/downloads Vendor software]
* [http://support.saleae.com/hc/en-us/categories/200077184-sdks-automation-betas SDKs]

[[Category:Device]]
[[Category:Logic analyzer]]
[[Category:Supported]]

Saleae Logic Pro 16

2014-11-04T19:35:36Z

Balrog: add photos and cleanup

[[File:{{Infobox logic analyzer
| image = [[File:Saleae Logic Pro 16 bottom.jpg|180px]]
| name = Saleae Logic Pro 16
| status = unsupported
| source_code_dir =
| channels = 16
| samplerate = 500/100/50/25/20MHz
| samplerate_state = —
| triggers = none (SW-only)
| voltages = -50 — 50V tolerant
| threshold = 1.2V to 5.5V digital, 0 to 10V analog
| memory = none
| compression = yes
| website = [https://www.saleae.comcom]
}}

The '''Saleae Logic Pro 16''' is a USB 3.0-based, 16-channel logic analyzer with 100/50/32/16MHz sampling rate (at 3/6/9/16 enabled channels). It supports analog sampling on all 16 channels.
It is part of the second-generation Saleae Logic series, which consists of the Logic 4 and 8, and the Pro 8 and 16.

The case requires a '''Torx T9''' screwdriver to open.

See [[Saleae Logic16/Info]] for more details (such as '''lsusb -vvv''' output) about the device.

See [[Saleae Logic]] and [[Saleae Logic16]] for the predecessor products of the Saleae Logic Pro16.

== Hardware ==

* '''FPGA''': [http://www.xilinx.com/support/index.html/content/xilinx/en/supportNav/silicon_devices/fpga/spartan-6.html Xilinx Spartan-6 XC6SLX16], 14,579 logic elements ([http://www.xilinx.com/support/documentation/data_sheets/ds160.pdf family overview]) ([http://www.xilinx.com/support/documentation/data_sheets/ds162.pdf datasheet])
* '''USB interface chip''': [http://www.cypress.com/?mpn=CYUSB3014-BZXI Cypress CYUSB3014-BZXI (FX3)] ([http://www.cypress.com/?docID=50647 datasheet])
* '''ADCs''' 2x [https://www.hittite.com/products/view.html/view/HMCAD1100 Hittite Microwave HMCAD1100] ([https://www.hittite.com/content/documents/data_sheet/hmcad1100.pdf datasheet])
* '''32Kbit I2C EEPROM''': [http://www.microchip.com/wwwproducts/Devices.aspx?dDocName=en010774 24C32A] ([http://ww1.microchip.com/downloads/en/DeviceDoc/21709J.pdf datasheet])
* '''12x Amplifiers''': [http://www.analog.com/en/high-speed-op-amps/high-speed-rail-to-rail-amplifiers/ada4891-4/products/product.html Analog Devices ADA4891-4] ([http://www.analog.com/static/imported-files/data_sheets/ADA4891-1_4891-2_4891-3_4891-4.PDF datasheet])
* This list is not yet complete.

There are several testpoints on the underside of the PCB. It is not yet certain what these are for. There is no visible JTAG header.

== Photos ==

<gallery>
File:Saleae Logic Pro 16 front.jpg|Device, front
File:Saleae Logic Pro 16 top.jpg|Device, top
File:Saleae Logic Pro 16 bottom.jpg|Device, bottom
File:Saleae Logic Pro 16 PCB front.jpg|PCB, top
File:Saleae Logic Pro 16 PCB rear.jpg|PCB, bottom

</gallery>

== Resources ==

* [http://support.saleae.com/hc/en-us/sections/200114124-get-started-using-the-saleae-logic-analyzer Manual]
* [http://www.saleae.com/downloads Vendor software]
* [http://support.saleae.com/hc/en-us/categories/200077184-sdks-automation-betas SDKs]

[[Category:Device]]
[[Category:Logic analyzer]]
[[Category:Supported]]

File:Saleae Logic Pro 16 PCB rear.jpg

2014-11-04T19:32:25Z

Balrog: Saleae Logic Pro 16 PCB rear

== Summary ==
Saleae Logic Pro 16 PCB rear
== Licensing ==
{{PD}}

File:Saleae Logic Pro 16 PCB front.jpg

2014-11-04T19:31:33Z

Balrog: Saleae Logic Pro 16 PCB front

== Summary ==
Saleae Logic Pro 16 PCB front
== Licensing ==
{{PD}}

File:Saleae Logic Pro 16 bottom.jpg

2014-11-04T19:30:47Z

Balrog: Saleae Logic Pro 16 bottom

== Summary ==
Saleae Logic Pro 16 bottom
== Licensing ==
{{PD}}

File:Saleae Logic Pro 16 top.jpg

2014-11-04T19:29:56Z

Balrog: Saleae Logic Pro 16 top

== Summary ==
Saleae Logic Pro 16 top
== Licensing ==
{{PD}}

File:Saleae Logic Pro 16 front.jpg

2014-11-04T19:28:43Z

Balrog: Saleae Logic Pro 16 front

== Summary ==
Saleae Logic Pro 16 front
== Licensing ==
{{PD}}

Saleae Logic Pro 16

2014-11-04T19:27:05Z

Balrog: Added new device

[[File:{{Infobox logic analyzer
| image = none
| name = Saleae Logic Pro 16
| status = unsupported
| source_code_dir = none
| channels = 16
| samplerate = 500/100/50/25/20MHz
| samplerate_state = —
| triggers = none (SW-only)
| voltages = -50 — 50V tolerant
| threshold = 1.2V to 5.5V digital, 0 to 10V analog
| memory = none
| compression = yes
| website = [https://www.saleae.comcom]
}}

The '''Saleae Logic Pro 16''' is a USB 3.0-based, 16-channel logic analyzer with 100/50/32/16MHz sampling rate (at 3/6/9/16 enabled channels). It supports analog sampling on all 16 channels.
It is part of the second-generation Saleae Logic series, which consists of the Logic 4 and 8, and the Pro 8 and 16.

The case requires a '''Torx T9''' screwdriver to open.

See [[Saleae Logic16/Info]] for more details (such as '''lsusb -vvv''' output) about the device.

See [[Saleae Logic]] and [[Saleae Logic16]] for the predecessor products of the Saleae Logic Pro16.

== Hardware ==

* '''FPGA''': [http://www.xilinx.com/support/index.html/content/xilinx/en/supportNav/silicon_devices/fpga/spartan-6.html Xilinx Spartan-6 XC6SLX16], 14,579 logic elements ([http://www.xilinx.com/support/documentation/data_sheets/ds160.pdf family overview]) ([http://www.xilinx.com/support/documentation/data_sheets/ds162.pdf datasheet])
* '''USB interface chip''': [http://www.cypress.com/?mpn=CYUSB3014-BZXI Cypress CYUSB3014-BZXI (FX3)] ([http://www.cypress.com/?docID=50647 datasheet])
* '''ADCs''' 2x [https://www.hittite.com/products/view.html/view/HMCAD1100 Hittite Microwave HMCAD1100] (https://www.hittite.com/content/documents/data_sheet/hmcad1100.pdf[] datasheet)
* '''32Kbit I2C EEPROM''': [http://www.microchip.com/wwwproducts/Devices.aspx?dDocName=en010774 24C32A] ([http://ww1.microchip.com/downloads/en/DeviceDoc/21709J.pdf datasheet])
* '''12x Amplifiers''': [http://www.analog.com/en/high-speed-op-amps/high-speed-rail-to-rail-amplifiers/ada4891-4/products/product.html Analog Devices ADA4891-4] (http://www.analog.com/static/imported-files/data_sheets/ADA4891-1_4891-2_4891-3_4891-4.PDF datasheet)
* This list is not yet complete.

There are several testpoints on the underside of the PCB. It is not yet certain what these are for. There is no visible JTAG header.

== Photos ==

<gallery>
File:Saleae Logic Pro 16 front.jpg|Device, front
File:Saleae Logic Pro 16 top.jpg|Device, top
File:Saleae Logic Pro 16 bottom.jpg|Device, bottom
File:Saleae Logic Pro 16 PCB front.jpg|PCB, top
File:Saleae Logic Pro 16 PCB rear.jpg|PCB, bottom

</gallery>

== Resources ==

* [http://support.saleae.com/hc/en-us/sections/200114124-get-started-using-the-saleae-logic-analyzer Manual]
* [http://www.saleae.com/downloads Vendor software]
* [http://support.saleae.com/hc/en-us/categories/200077184-sdks-automation-betas SDKs]

[[Category:Device]]
[[Category:Logic analyzer]]
[[Category:Supported]]